TotalCare  /  Hardware  /  Laser Scanning  /  GLS-1000


Operator friendly, compact all in one design

Offers quick and hassle free setups, which reduce the amount of time between instrument setups and improve productivity.  The GLS-1000’s design incorporates the use of on-board lithium ion batteries, so there is no need to carry around a bulky 12 volt battery. The aerodynamic design helps reduce the affect of wind. 

Features & Benefits:

  • On-board data collection and storage
  • Compact all in 1 design
  • Precise Scan Technology
  • Hot-swappable on-board lithium ion batteries
  • Class 1 invisible, eye safe, pulse laser
  • Built-in 2 mega pixel digital camera
  • Wireless Lan & USB connectivity
  • Dual axis compensators
  • 3000 precise points/second scan rate 
  • 330m maximum range at 90% reflectivity
  • 150m maximum range at 18% reflectivity
  • 4mm accuracy from 1m to 150m
  • 6” horizontal and vertical angular accuracy
  • Horizontal and vertical jogs

Precise Scan Technology

The GLS-1000 integrates pulse-based time of flight and phase-based technologies to achieve industry leading accuracy and “clean” scan data.  The GLS-1000 inherently has less point cloud noise, the most consistent accuracy, the ability to detail slight texture variations and great results at ranges over 100m.

On-board lithium ion batteries

The incorporation of on-board batteries reduces the amount of needed equipment in the field.  The GLS-1000 uses four batteries two per side and these batteries are hot swappable.   

Class 1 invisible, eye safe, laser

The GLS-1000’s laser is a class 1, invisible, and eye safe laser, which allows the unit to  operate at any time or place with no effect to people or the environment.

Built in 2 mega pixel digital camera

The 2 mega pixel digital camera allows for sharp and more detailed images.  When connected to a PC, the digital camera offers live video feed of the job site, which aids in the scan setup and data acquisition.  With the camera being built in this also reduces the amount of equipment needed in the field.

Wireless LAN and USB connectivity

The GLS-1000 offers wireless LAN (802.11b) and USB 2.0 PC connection. 

Dual axis compensators

The use of dual axis compensators allows for more accurate instrument setups and scans.  Occupy a known coordinate and backsight so traversing within one coordinate system is possible. Compensators can be turned off for tiltable mounts.

3000 precise points/second scan rate

The GLS-1000’s class 1 laser has a data capture rate of 3000 precise points/second--each and every shot is tilt-compensated and processed through the filter banks for fast and reliable scans of hundreds of thousands of points in just minutes.

150m/330m range

The GLS-1000 scan range is 150m to a typical surface (18% reflectivity). Extended range to 330m to more reflective surfaces.

4mm from 1m to 150m single point accuracy

The class 1 laser of the GLS-1000 has a single point accuracy of 4mm throughout the 150m range.  Unique to Topcon’s GLS-1000 is the mechanical ability to select from multiple lens arrays to control the laser beam.  This provides consistent 4mm accuracy throughout the range from 1m to 150m.  This ability is an advantage over single lens competitive scanners where the accuracy changes throughout the range of the laser. 

6” horizontal and vertical angle accuracy

With the use of dual axis compensators, this allows the GLS-1000 to maintain an angular accuracy of 6”.  This superior accuracy is a result of decades of Topcon optical angle encoders’ experience.

On-board data collection, LCD display and keyboard

The GLS-1000 has an on-board data collector with a LCD display and 21 keys keyboard.  The GLS-1000 has the ability to function as a stand-alone laser scanner with no need to connect to a computer.  This ability gives the scanner the freedom of not needing a PC to operate, which further reduces the amount of required field equipment.

SD card data storage

SD card data storage allows for easy data transfer from on-board data collector to processing software.

Horizontal and vertical jogs

The use of the GLS-1000’s horizontal and vertical jogs greatly increases the orientation process of setting up scans.  The jogs also aid the use of the on-board data collector.

Low power consumption

The use of a class 1 invisible laser offers the benefit of low power consumption.  With lower power consumption, the GLS-1000 can operate at longer times with fewer battery changes.  Remarkably, distance, speed, and accuracy were not compromised while maintaining this lower power consumption.

4 hour battery life from on-board batteries

With the low power consumption of the class 1 laser, the GLS-1000 can operate for 4 hours doing a continuous scan on one set of batteries at a temperature of 20?C.

Optical plummet

The GLS-1000 includes an optical plummet to help with faster control point setups.

Electronic tilt display

To aid in leveling the GLS-1000 the, instrument has the ability to electronically display the tilt reading.  

Associated Products